iConverter Single-Fiber CWDM Multiplexers and Add/Drop
Data SheetJellemzők
iConverter Single-Fiber CWDM/X
- 2 and 4 channels (wavelengths) multiplexer/demultiplexer modules
- Scalable to 8 Channels using Band Splitter
iConverter Single-Fiber CWDM/AD
- 1-Channel Optical Add and Drop Multiplexers modules
- Add and Drop functions in both directions
Common Product Features
- Protocol and rate transparent for applications up to 10Gbps
- Minimal and uniform optical loss facilitates easy network planning
- Industry standard LC connectors
- Seamless integration with other iConverter media converters and chassis for multi-service platforms
- Passive device that can be installed in a powered chassis for managed applications
- Manageable via SNMPv1/v2c/v3, Telnet or serial console port
- One (1) Year Warranty and Free 24/7 Technical Support
iConverter Single-Fiber Course Wave Division Multiplexing (CWDM) modules provide a flexible and cost effective solution for increasing fiber capacity over single fiber networks. CWDM over single-fiber increases network bandwidth capacity by enabling multiple wavelengths, or data channels that carry independent services over existing fiber infrastructure. Up to sixteen separate wavelengths can be transported on a single-fiber link with iConverter Single-Fiber CWDM modules.
Alkalmazás
Two Networks on a Single-Fiber Protected Ring
Single-Fiber CWDM/X Multiplexer/Demultiplexer Modules
Single-Fiber iConverter CWDM/X modules are available in 2 and 4-Channel models, supporting a variety of wavelength combinations and port configurations.
The figure above shows a pair of 2-Channel, single-fiber CWDM/X units that operate using the 1550nm, 1570nm, 1590nm and 1610nm wavelengths. Note that each wavelength is unidirectional and only flows in one direction. The channel ports of iConverter CWDM/X model 8872 receive 1570nm and 1610nm, while the channel ports of model 8873 receive 1550nm and 1590nm.
Single-Fiber CWDM/AD Add & Drop Multiplexers
iConverter 1-Channel Single-Fiber CWDM/AD modules are Course Wave Division Multiplexing (CWDM) Optical Add and Drop Multiplexers (OADM). The CWDM/AD modules add (multiplex) and drop (de-multiplex) one channel on both directions of a CWDM single-fiber route. Nine standard models of the 1-Channel Single-Fiber CWDM/AD modules are available.
iConverter CWDM/AD modules add new access points anywhere on a single-fiber CWDM network, without impacting the remaining channels traversing the network. Access points can be added to linear, bus, and ring networks, where the dual-direction ring design provides redundant protected architecture.
 |
The small and compact size of the iConverter CWDM/X and CWDM/AD modules yields one of the highest port densities in the industry. A 2U high 19-module iConverter chassis populated with modules can yield up to 120 wavelengths of capacity. iConverter CWDM/X modules are passive devices that require no external power. They can also be installed in an iConverter powered chassis with a management module 1 and be managed using Omnitron’s NetOutlook® network management software, third-party SNMP software, Telnet or a serial console port. |
The modules can be installed in any iConverter chassis equipped with other iConverter media converters and transponders to provide a multi-service platform capable of delivering Ethernet, TDM, SONET and other services across a CWDM fiber common link.
1 For complete management support, use a M2 series module (NMM2, GX/TM2, 2GXM2, 10/100M2, 2FXM2) or higher.
Specifications
| Model Type | Single-Fiber CWDM/X MUX/DEMUX |
| Channels | 2 Channel |
| 4 Channel | |
| Options | Optional Expansion port |
| Common Link | Single-Fiber |
| Connectors | LC (UPC) |
| Dimensions | W: 0.85” x D: 4.5” x H:2.8" |
| Weight | 12 oz. |
| Compliances | UL, CE, FCC Class A |
| Power Requirements | Not powered for non-managed applications 0.025A max @ 3.3VDC for managed applications |
| Temperature | Standard: 0 to 70o C |
| Storage: -40 to 80o C | |
| Humidity | 5 to 95% (non-condensing) |
| Altitude | -100m to 4,000m |
| MTBF (hrs) | > 1,000,000 hrs |
| Model Type | Single-Fiber CWDM/AD Add/Drop MUX |
| Channels | 1 Channel |
| Common Link | Single-Fiber |
| Connectors | LC (UPC) |
| Dimensions | W: 0.85” x D: 4.5” x H:2.8" |
| Weight | 12 oz. |
| Compliances | UL, CE, FCC Class A |
| Power Requirements | Not powered for non-managed applications 0.025A max @ 3.3VDC for managed applications |
| Temperature | Standard: 0 to 70o C |
| Storage: -40 to 80o C | |
| Humidity | 5 to 95% (non-condensing) |
| Altitude | -100m to 4,000m |
| MTBF (hrs) | > 1,000,000 hrs |
| Model Type | Model Number | Channel Port ITU Center Wavelength (nm) Tx/Rx | Insertion Loss | Adjacent Channel Port Isolation | Non-Adjacent Channel Port Isolation | Return Loss (filtered channel) |
|---|---|---|---|---|---|---|
| 2-Channel MUX/DEMUXs* | 8870-0 | 1471/1491, 1511/1531 | < 1.9dB | > 30dB | > 40dB | > 45dB |
| 8871-0 | 1491/1471, 1531/1511 | <1.9dB | > 30dB | > 40dB | > 45dB | |
| 8872-0 | 1551/1571, 1591/1611 | <1.9dB | > 30dB | > 40dB | > 45dB | |
| 8873-0 | 1571/1551, 1611/1591 | <1.9dB | > 30dB | > 40dB | > 45dB | |
| 4-Channel MUX/DEMUXs* | 8874-0 | 1271/1291, 1311/1331, 1351/1371, 1431/1451 | <2.4dB | > 30dB | > 40dB | > 45dB |
| 8875-0 | 1291/1271, 1331/1311, 1371/1351, 1451/1431 | <2.4dB | > 30dB | > 40dB | > 45dB | |
| 8876-0 | 1471/1491, 1511/1531, 1551/1571, 1591/1611 | < 2.4dB | > 30dB | > 40dB | > 45dB | |
| 8877-0 | 1491/1471, 1531/1511, 1571/1551, 1611/1591 | < 2.4dB | > 30dB | > 40dB | > 45dB | |
| 1-Channel OADM |
8878-XX | See Table Below | <1.9dB | > 30dB | > 40dB | > 45dB |
Consult factory for customized CWDM models
* Single-fiber CWDM/X models must be used in pairs. The Tx wavelengths on one end has to match the Rx wavelengths on the other.
Chassis and Mounting Options Ordering Table
| 19-Module | 5-Module | 2-Module | 1-Module | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Configuration | AC (60 watts) | AC (120 watts) | 24VDC | 48VDC | AC | 24VDC | 48VDC | AC | 18-60DC | US AC | UNIV AC |
| One (1) Power Supply | 8200-1 | 8201-1 | 8206-1 | 8205-1 | 8220-1 | 8226-1 | 8225-1 | 8230-0 | 8235-0 | 8240-1 | 8240-2 |
| One (1) Power Supply with Dying Gasp Support | - | - | - | - | - | - | - | 8230-1 | 8235-1 | 8241-1 | 8241-2 |
| Two (2) Power Supplies | 8200-2 | 8201-2 | 8206-2 | 8205-2 | 8220-2 | 8226-2 | 8225-2 | - | - | 8245-111* | 8245-112* |
| Three (3) Power Supplies | 8200-3 | 8201-3 | 8206-3 | 8205-3 | - | - | - | - | - | - | - |
| Spare Power Supply | 8200-9 | 8201-9 | 8206-9 | 8205-9 | 8220-9 | 8226-9 | 8225-9 | - | - | - | - |
| 23" Rack Mounting Kit | 8091-2 | 8091-2 | 8091-2 | 8091-2 | 8092-2 | 8092-2 | 8092-2 | - | - | - | - |
| Blank Module Panel | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | - | - |
| Wall Mounting Hardware Kit | - | - | - | - | - | - | 8249-0 | 8249-0 | 8249-0 | 8249-0 | |
| 1U 19" Rack Mount Shelf | - | - | - | - | - | - | - | 8260-0 | 8260-0 | 8260-0 | 8260-0 |
| DIN Rail Mounting Kit | - | - | - | - | - | - | - | - | 8250-0 | 8250-0 | |
When ordering a Wide Temperature chassis, add a W to the end of the part number. For example:8230-1W
Consult factory for extended temperature (-40 to +75º C) models.
* Click on part number for complete ordering information on the 1-Slot Redundant Power Chassis with Power over Ethernet
